Document Type : Review
Authors
1 Department of Chemistry, Federal University of Agriculture
2 Department Of Chemistry, Federal University Of Agriculture
Abstract
The rapid growth of the plastic/polymer industry and the increasing amount of plastic waste has generated a need for the development of more sustainable alternatives to the production and use of polymer products. Green chemistry provides numerous benefits for the polymer manufacturing process, including energy savings, a smaller ecological footprint, and enhanced product performance. Energy can be saved by reducing the number of steps in the manufacturing process and replacing traditional energy-intensive processes, such as thermal polymerization, with more efficient alternatives when using green chemistry. Green chemistry offers an innovative approach to the production of polymer products through the use of environmentally friendly and sustainable chemical processes. This paper explores the application of green chemistry to the manufacturing of plastic/polymer products, focusing on the production of biodegradable polymers with emphasizes on the advantages of green chemistry principles on plastic productions. Also entailed in this study are some perceived problems associated with functional polymers and plastics.
Keywords
Main Subjects
[1] J.N. Hahladakis, C.A. Velis, R. Weber, E. Iacovidou, P. Purnell, J Hazard Mater., 344, 179-199 (2018).
[2] H. Karan, C. Funk, M. Grabert, M. Oey, B. Hankamer, Trends Plant Sci., 24(3), 237-249 (2019).
[3] V. C. Shruti, G. Kutralam-Muniasamy, Sci Total Environ., 697, 134139 (2019).
[4] W. Abdussalam-Mohammed, A.Q. Ali, A.O. Errayes, Chem. Methodol., 4(4), 408-423 (2020)
[5] R.A. Sheldon, Acs Sustain Chem Eng., 6(1), 32-48 (2018).
[6] S.S. Panchal, D.V. Vasava, ACS omega., 5(9), 4370-4379 (2020).
[7] S. Kobayashi, Structural Chemistry., 28, 461-474 (2017).
[8] T.P. Haider, C. Völker, J. Kramm, K. Landfester, F.R. Wurm, Angew Chem Int Edit., 58(1), 50-62 (2019).
[9] A. Ivanković, A. Dronjić, A.M. Bevanda, S. Talić, Int J Green Energy., 6(3), 39-48 (2017).
[10] O.V. Kharissova, B.I. Kharisov, C.M. Oliva González, Y.P. Méndez, I. López, R. Soc. Open Sci., 6(11), 191378 (2019).
[11] G. Kaur, K. Uisan, K.L. Ong, C.S.K. Lin, Curr. Opin. Green Sustain., Chem, 9, 30-39 (2018).
[12] J.B. Zimmerman, P.T. Anastas, H.C. Erythropel, W. Leitner, Science., 367(6476), 397-400 (2020).
[13] A. Gałuszka, Z. Migaszewski, J. Namieśnik, TrAC, Trends Anal. Chem., 50, 78-84 (2013).
[14] F.M. Kerton, R. Marriott, Alternative solvents for green chemistry., (2013).
[15] R.A. Sheldon, Acs Sustain Chem Eng., 6(1), 32-48 (2018).
[16] S. Jadoun, R. Arif, N.K. Jangid, R.K. Meena, Environ Chem Lett., 19, 355-374 (2021).
[17] W. Xie, T. Li, A. Tiraferri, E. Drioli, A. Figoli, J.C. Crittenden, B. Liu, Acs Sustain Chem Eng., 9(1), pp.50-75 (2020).
[18] M.A. Dubé, S. Salehpour, Macromol React Eng., 8(1), 7-28 (2014).
[19] M.J. Worthington, R.L. Kucera, J.M. Chalker, Green Chemistry., 19(12), 2748-2761 (2017).
[20] M.J. Mulvihill, E.S. Beach, J.B. Zimmerman, P.T. Anastas, Annu Rev Env Resour, 36, 271-293 (2011).
[21] N.B. Hartmann, S. Rist, J. Bodin, L.H. Jensen, S.N. Schmidt, P. Mayer, A. Baun, Integr. Environ. Assess. Manag., 13(3), 488-493 (2017).
[22] J.H. Jorge, E.T. Giampaolo, C.E. Vergani, A.L. Machado, A.C. Pavarina, I.Z. Carlos, Gerodontology., 24(1), 52-57 (2007).
[23] Y.P. Singh, S. Dasgupta, S. Nayar, R. Bhaskar, J. Biomater. Sci. Polym. Ed., 31(6), 781-803 (2020).
[24] H. Machida, M. Takesue, R.L. Smith Jr, J Supercrit Fluid., 60, 2-15 (2011).
[25] V. Goodship, E.O. Ogur, Polymer processing with supercritical fluids., (Vol. 15). iSmithers Rapra Publishing. (2005).
[26] F. Sahena, I.S.M. Zaidul, S. Jinap, A.A. Karim, K.A. Abbas, N.A.N. Norulaini, A.K.M. Omar, Int J Food Eng., 95(2), 240-253 (2009).
[27] A.S. Grewal, K. Kumar, S. Redhu, S. Bhardwaj, Int. J. Pharm. Sci. Res., 3(5), 278-285 (2013).
[28] C. Zhang, L. Liao, S.S. Gong, Green Chemistry., 9(4), 303-314 (2007).
[29] S. Ravichandran, E. Karthikeyan, Int. J. Chemtech Res., 3(1), 466-470 (2011).
[30] B. Laycock, M. Nikolić, J.M. Colwell, E. Gauthier, P. Halley, S. Bottle, G. George, Prog. Polym. Sci., 71, 144-189 (2017)..
[31] D. Elvers, C.H. Song, A. Steinbüchel, J. Leker, Polym Rev., 56(4), 584-606 (2016).
[32] V.R. Feig, H. Tran, Z. Bao, ACS Cent. Sci., 4(3), 337-348 (2018).
[33] S. Agarwal, Macromol Chem Phys., 221(6), 2000017 (2020).
[34] D. Marlina, H. Sato, In IOP Conference Series: Materials Science and Engineering., 835, 012004 (2020).
[35] R. Scaffaro, A. Maio, F. Sutera, E.F. Gulino, M. Morreale, Polymers, 11(4), 651 (2019).
[36] M. Mierzwa-Hersztek, K. Gondek, M. Kopeć, J Polym Environ., 27, 600-611 (2019).
[37] D. Elvers, C.H. Song, A. Steinbüchel, J. Leker, Polym Rev., 56(4), 584-606 (2016).
[38] C. Maraveas, Polymers., 12(5), 1127 (2020).
[39] M. Gao, Y. Meng, C. Shen, Q. Pei, Adv Mater., 34(21), 2109798 (2022).
[40] L.F. Hart, J.E. Hertzog, P.M. Rauscher, B.W. Rawe, M.M. Tranquilli, S.J. Rowan, Nat. Rev. Mater., 6(6), 508-530 (2021).
[41] L.C. Jesus, J.M. Oliveira, R.M. Leao, L.R. Beltrami, A.J. Zattera, C.T. Anflor, S. M. Luz, Polym. Test., 113, 107665 (2022).
[42] Q. Zhang, J. Huang, K. Wang, W. Huang, Adv Mater., 34(26), 2110639 (2022).
[43] A. Reizabal, C.M. Costa, L. Pérez‐Álvarez, J.L. Vilas‐Vilela, S. Lanceros‐Méndez, Adv Funct Mater., 33(3), 2210764 (2023).
[44] S. Mangaraj, A. Yadav, L.M. Bal, S.K. Dash, N.K. Mahanti, J Package Technol Res., 3, 77-96 (2019).
[45] X. Zhang, W. Liu, D. Yang, X. Qiu, Adv Funct Mater., 29(4), 1806912 (2019).
[46] V.O. Bulatović, V. Mandić, D. Kučić Grgić, A. Ivančić, J Polym Environ., 29, 492-508 (2021).
[47] S. Stino, Biomater., 1(12), 15-23 (2022).
[48] A.D.S.M. de Freitas, A.P.B. da Silva, L.S. Montagna, I.A. Nogueira, N.K. Carvalho, V.S. de Faria, A.P. Lemes, J. Biomater. Sci. Polym. Ed., 33(7), 900-945 (2022).
[49] A. Kanwal, M. Zhang, F. Sharaf, C. Li, Polym. Bull., 1-28 (2022).
[50] M. Palencia, T.A. Lerma, V. Garcés, M.A. Mora, J.M. Martínez, S.L. Palencia, React Funct Polym., (2021).
[51] A. Chatterjee, S. Khan, World., 11(4), 16-19 (2022).
[52] W. Xiaoming, G. Shiwei, L. Zhiqian, X. Xueyang, G. Lei, L. Qiang, L. Kui, Appl. Mater. Today., 17, 92-103 (2019).
[53] C.I.A. La Fuente, B.C. Maniglia, C.C. Tadini, Packag. Technol. Sci., 36(2), 81-95 (2023).
[54] M. del Rosario Salazar, J. Duque, A. Saenz-Galindo, R. Rodriguez-Herrera, (Eds.). Biodegradable Polymers: Concepts and Applications (2023).
[55] A. Samir, F.H. Ashour, A.A. Hakim, M. Bassyouni, npj mater. Degrad., 6(1), 68 (2022).
[56] E. Delamarche, A. Mattlet, S. Livi, J.F. Gérard, R. Bayard, V. Massardier, Frontiers in Materials., (2022).
[57] G.P. Udayakumar, S. Muthusamy, B. Selvaganesh, N. Sivarajasekar, K. Rambabu, F. Banat, P.L. Show, J. Environ. Chem. Eng., 9(4), 105322 (2021).
[58] W.L. Stoppel, C.E. Ghezzi, S.L. McNamara, L.D.B. Iii, D.L. Kaplan, Ann Biomed Eng., 43, 657-680 (2015).
[59] J. Liu, S. Willför, C. Xu, Bioact. Carbohydr. Diet. Fibre., 5(1), 31-61 (2015).
[60] M. Jorfi, E.J. Foster, J. Appl. Polym. Sci., 132(14) (2015).
[61] S. Doppalapudi, A. Jain, W. Khan, A.J. Domb, Polym Adv Technol., 25(5), 427-435 (2014).
[62] S. Farah, D.G. Anderson, R. Langer, Adv. Drug Deliv. Rev., 107, 367-392 (2016).
[63] Taib, N.A.A.B., M.R. Rahman, D. Huda, K.K. Kuok, S. Hamdan, M.K.B. Bakri, A. Khan, Polym. Bull., 1-35 (2022).
[64] L. Gritsch, E. Perrin, J.M. Chenal, Y. Fredholm, A.L. Maçon, J. Chevalier, A.R. Boccaccini, Appl. Mater. Today., 22, 100923 (2021).
[65] M.F. Oliveira, P.P. Guimarães, A.D. Gomes, D. Suárez, R.D. Sinisterra, J. Chem. Biol., 6, 7-23 (2013).
[66] T. Narancic, F. Cerrone, N. Beagan, K.E. O’Connor, Polymers (Basel)., 12: 920 (2020).
[67] S.O. Alaswad, A.S. Mahmoud, P. Arunachalam, Polymers., 14(22), 4924(2022).
[68] D.C. Salinas, A. Sordelli, L.A. Martínez, G. Villoldo, C. Bernal, M.S. Perez, M.L. Foresti, Int. J. Biol. Macromol., 189, 1-10 (2021).
[69] X. Li, R. Cui, L. Sun, K.E. Aifantis, Y. Fan, Q. Feng, F. Watari, Int. J. Polym. Sci., (2014).
[70] R.S. Ambekar, B. Kandasubramanian, Ind. amp; Eng. Chem. Res., 58(16), 6163-6194 (2019).
[71] A. Yadav, S. Mangaraj, R. Singh, N. Kumar, S. Arora, Biopolymers as packaging material in food and allied industry (2018).
[72] U. Novak, M. Bajić, K. Kõrge, A. Oberlintner, J. Murn, K. Lokar, B. Likozar, Physical Sciences Reviews., 5(3), 20190099 (2019).
[73] F. Garavand, M. Rouhi, S.H. Razavi, I. Cacciotti, R. Mohammadi, Int. J. Biol. Macromol., 104, 687-707 (2017).
[74] J.W. Rhim, Y.T. Kim, Innov Food Sci Emerg Technol., 413-442 (2014).
[75] B. Palumbo, F. Bianconi, I. Palumbo, M.L. Fravolini, M. Minestrini, S. Nuvoli, A. Spanu, Diagnostics., 10(9), 696 (2020).
[76] L. Pinto, M.A. Bonifacio, E. De Giglio, E. Santovito, S. Cometa, A. Bevilacqua, F. Baruzzi. Food Packag. Shelf Life., 28, 100676 (2021).
[77] S.A. Varghese, S. Siengchin, J. Parameswaranpillai, Food Biosci., 38, 100785 (2020).
[78] Y. Liu, S. Ahmed, D.E. Sameen, Y. Wang, R. Lu, J. Dai, W. Qin, Trends Food Sci Technol., 112, 532-546 (2021).
[79] B. Hassan, S.A.S. Chatha, A.I. Hussain, K.M. Zia, N. Akhtar, Int. J. Biol. Macromol., 109, 1095-1107 (2018).
[80] S.A. Mohamed, M. El-Sakhawy, M.A.M. El-Sakhawy, Carbohydr. Polym., 238, 116178 (2020).
[81] A.T. Petkoska, D. Daniloski, N.M. D'Cunha, N. Naumovski, A.T. Broach, Food Res. Int., 140, 109981 (2021).
[82] M. Kouhi, M.P. Prabhakaran, S. Ramakrishna, Trends .Food. Sci .Technol., 103, 248-263 (2020).
[83] T. Garrido, J. Uranga, P. Guerrero, K. de la Caba, Polymers for food applications., 25-59 (2018).
[84] P. Cazón, G. Velazquez, J.A. Ramírez, M. Vázquez, Food Hydrocolloids., 68, 136-148 (2017).
[85] W. Kim, Y. Wang, C. Selomulya, Trends Food Sci. Technol., 105, 261-272 (2020).
[86] C. Bilbao‐Sainz, B.S. Chiou, K. Punotai, D. Olson, T. Williams, D. Wood, T. McHugh, J. Food Sci., 83(7), 1880-1887 (2018).
[87] Y. Luo, Q. Wang, Y. Zhang, J. Agric. Food Chem., 68(46), 12993-13000 (2020).
[88] S.F. Hosseini, L. Ramezanzade, D.J. McClements, Trends Food Sci. Technol., 109, 322-339 (2021).
[89] M.L. Zambrano-Zaragoza, R. González-Reza, N. Mendoza-Muñoz, V. Miranda-Linares, T.F. Bernal-Couoh, S. Mendoza-Elvira, D. Quintanar-Guerrero, Int. J. Mol. Sci., 19(3), 705 (2018).
[90] Y. Li, J. Bi, S. Wang, T. Zhang, X. Xu, H. Wang, M. Tan, J .Agr .Food .Chem., 66(9), 2143-2150 (2018).
[91] H. Cui, D. Surendhiran, C. Li, L. Lin, Food Packaging and Shelf Life., 24, 100511 (2020).
[92] A. Cottaz, L. Bouarab, J. De Clercq, N. Oulahal, P. Degraeve, C. Joly, Front. Chem., 7, 148 (2019).
[93] M. Ejaz, Y.A. Arfat, M. Mulla, J. Ahmed, Food Packag. Shelf Life., 15, 113-121 (2018).
[94] I. Echeverría, M.E. López-Caballero, M.C. Gómez-Guillén, A.N. Mauri, M.P. Montero, Int. J. Food Microbiol., 266, 142-149 (2018).
[95] M. Klein, E. Poverenov, J. Sci. Food Agric., 100(6), 2337-2347 (2020).
[96] M. Chakraborty, M. Hasanuzzaman, M. Rahman, M.A.R. Khan, P. Bhowmik, N.U. Mahmud, T. Islam, Agriculture., 10(12), 624 (2020).
[97] U. Chadha, P. Bhardwaj, S.K. Selvaraj, K. Kumari, T.S. Isaac, M. Panjwani, V. Paramasivam, Materials Research Express., 9(5) (2022).
[98] G.Z. Yin, X.M. Yang, J. Polym. Res., 27(2), 38 (2020).
[99] L. Zhang, Y. Ji, X. Gu, W. Zhang, N. Zhou, Z. Zhang, X. Zhu, React. Funct. Polym., 138, 96-103 (2019).
[100] D. Das, N. Mulchandani, A. Kumar, V. Katiyar, Adv. Polym. Technol., 121-144(2020).
[101] X. Gao, L. Huang, B. Wang, D. Xu, J. Zhong, Z. Hu, J. Zhou, ACS Appl. Mater. Interfaces., 8(51), 35587-35592 (2016).
[102] S. Aziz, S.H. Chang, Compos. Sci. Technol., 163, 1-9 (2018).
[103] Y.J. Li, C.Y. Fan, J.P. Zhang, X.L. Wu, Dalton Trans., 47(42), 14932-14937 (2018).
[104] V. Bharti, P.K. Singh, J.P. Sharma, Mater. Today: Proc., 34, 856-862 (2021).
[105] Y. Cao, K.E. Uhrich, J .Bioact .Compat .Polym., 34(1), 3-15 (2019).
[106] R.M. Howden, E.J. Flores, V. Bulović, K.K. Gleason, Org. Electron., 14(9), 2257-2268 (2013).
[107] M.M. Hasan, M.A. Shenashen, M.N. Hasan, H. Znad, M.S. Salman, M.R. Awual, J. Mol. Liq., 323, 114587 (2021).
[108] F. Mourabit, M. Boulaid, Mater. Today: Proc., 13, 1033-1038 (2019).
[109] M. Shen, B. Song, G. Zeng, Y. Zhang, W. Huang, X. Wen, W. Tang, Environ. Pollut., 263, 114469 (2020).
[110] T.O. Azeez, Thermoplastic recycling: properties, modifications, and applications. In Thermosoftening Plastics. Rijeka, Croatia: IntechOpen (2019).
[111] M. Okan, H.M. Aydin, M. Barsbay, J. Chem. Technol. Biotechnol., 94(1), 8-21 (2019).
[112] T.P. Haider, C. Völker, J. Kramm, K. Landfester, F.R. Wurm, Angew. Chem. Int. Ed., 58(1), 50-62 (2019).
[113] J.N. Hahladakis, C.A. Velis, R. Weber, E. Iacovidou, P. Purnell, J. Hazard. Mater., 344, 179-199 (2018).
)